Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual page 193

No. Description
Pump head, entire assembly, with:
1 Piston (sapphire)
2 Plate of the rear seal wash system
3 Piston seal (in plate of seal wash system)
(normal phase)
4 Seal ring (rear seal wash system)
5 Rear seal wash body (pump head bushing)
6 Support ring for the main piston seal
7 Main piston seal (reversed phase)
8 Seal ring (rear seal wash system)
9 Pump head
10 Valve cartridge (same as no. 12)
11 Valve nut (inlet check valve)
12 Valve cartridge (same as no. 10)
13 Valve nut (outlet check valve)
14 Tubing connector for the seal wash tubing
15 Capillary from working cylinder to equilibration cylinder
(U-tube)
15a NC pump (nanoViper)
15b Loading pump
Operating Instructions
UltiMate 3000 Series:
NCS-3500RS and NCP-3200RS
Part No.
NC pump Loading pump
6041.1901A 6041.1902
6040.0042 (= 2 pistons)
N.a.
6040.0306 (= 2 seals)
Included in 6040.2208
N.a.
6040.0012
6266.0305 (= 2 seals)
Included in 6040.2208
N.a.
6041.2301
Included in 6042.7007
6041.2301
Included in 6042.7007
Included in 6040.9502
Included in Included in
6041.3002 N.a.
N.a. 6041.3001
Page 185