Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual page 126

UltiMate 3000 Series:
NCS-3500RS and NCP-3200RS
♦ To delete an entry
Select the entry that you want to delete. To do so, click in the leftmost column and
press the Del key. A line can be deleted only if the entry has been correct.
4. Click OK to transfer the new entries and/or changes to the viscosity list in
Chromeleon. Otherwise, click Cancel to cancel the action and discard the changes.
The entries will now appear with the name and viscosity value, for example, in the
Commands dialog box for the NC pump under %A_Viscosity and %B_Viscosity (for
example, Solvent1_81_4%).
Observe the following:
♦ The viscosity list applies to all module instances that are installed on the same
Chromeleon server.
♦ Changes and new entries appear only for the module for which you have made them
on the Viscosities page in the Server Configuration program.
♦ To make the new entries and changes visible also for the other modules instances,
you have to restart the Chromeleon server (→ page 43). As an alternative, restart the
drivers for the other module instances. To do so, open the Properties dialog for the
related module in the Server Configuration program and click OK on one of the tab
pages.
Page 118
Fig. 56: Showing the viscosity
Operating Instructions