system-wide functions, for example, creating and running sequences. For more
information about panel tabsets, see the Chromeleon Help.
2. On the Panel Tabset for your timebase, click the page for the module.
3. Verify that the module is connected in Chromeleon (the LED next to the Connect
button is green). If the module is not yet connected, click Connect.
The control panel provides access to the operating parameters and commands required for
routine operation of the module. Additional functions are available in the Commands dialog
box. To open the Commands box from the panel tabset, select Command on the Control
menu.
Operating Instructions
Fig. 46: Control panel (here for the NCS-3500RS)
UltiMate 3000 Series:
NCS-3500RS and NCP-3200RS
Page 91