Consumables And Spare Parts - Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual

11.3 Consumables and Spare Parts

The part number always refers to the packing unit. Unless otherwise stated, the packing
unit is 1 unit. For more information, contact the Thermo Fisher Scientific sales
organization for Dionex HPLC Products.
Description
Bottle cap (4 screw caps) for seal wash and solvent reservoirs
Cap plugs (to close open holes in the reservoir caps), 20 plugs
Cap plugs and retaining guides for reservoir caps, kit including
10 cap plugs (to close open holes in the reservoir caps) and
5 retaining guides (to keep the liquid line in place in the reservoir cap)
Capillaries, capillary kit (with fittings), including
2 capillaries from working cylinder to equilibration cylinder (U tubes)
2 capillaries from pump head to purge unit
2 capillaries from purge unit to inline-filter
Capillaries, capillary kit for loading pump (with fittings), including:
1 capillary from working cylinder to equilibration cylinder (U-tubes)
1 capillary from pump head to purge unit
1 capillary from purge unit to inline-filter
Capillaries, capillary kit for NC pump (nanoViper, MP35N), including:
2 capillaries from working cylinder to equilibration cylinder (U-tubes)
1 capillary from right pump head to flow meter inlet
1 capillary from left pump head to flow meter inlet
Capillary clips (column compartment) → Column installation/capillary clips kit
Capillary, nanoViper, MP35N (0.25 x 155 mm I.D. x L)
To be used, for example, for calibrating solvents with the ProFlow flow meter or
establishing the solvent viscosity with the Classic flow meter or for purging the flow
meter.
Check valve cartridge, sapphire (the cartridge is the same for both the inlet and
outlet valve)
for the NC pump and loading pump
Check valve cartridge, ceramics (the cartridge is the same for both the inlet and
outlet valve)
for the NC pump and loading pump
Check valve nut kit (Ti) for double check valve, including
inlet check valve nut and outlet check valve nut
(NC pump and loading pump)
Cleaning swabs (10 swabs)
(for example, to clean the connection ports on the pump block or purge unit)
Column ID (pack of 5 IDs)
Column installation clips → Column installation/capillary clips kit
Column installation, column clips → Column clips
Column installation/capillary clips kit, including
Operating Instructions
UltiMate 3000 Series:
NCS-3500RS and NCP-3200RS
Part No.
6270.0013
6000.0047
6030.9101
6042.3001
6041.3001
6041.3002
6041.7892
6041.2300
6041.2301
6042.7007
6040.0006
6710.1505
6041.0011
Page 243