Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual page 252

UltiMate 3000 Series:
NCS-3500RS and NCP-3200RS
Description
6 column clips
2 clips to attach capillaries routed from top to bottom through the column chamber
Column switching valve
2-position, 6-port valve
2-position, 10-port valve
Column switching valve, rotor seal → Rotor seal
Column switching valve, stator → Stator
Drain kit for UltiMate 3000 systems
The kit includes all required components and detailed installation instructions.
Filter frit (PEEK, 10 µm) for solvent supply line filter (10 frits)
Filter frit (titanium, biocompatible, 2 µm, 2 frits)
For loading pump inline filter and ProFlow flow meter inline filter.
Fitting plug (Viper, titanium, biocompatible)
Flow meters:
ProFlow flow meter for nano LC (50 - 1500 nL/min)
Classic flow meter with flow selector for capillary LC (0.5 - 10 µL/min)
Classic flow meter with flow selector for micro LC (5 - 50 µL/min)
Flow selector (for Classic flow meters only) for
Capillary LC (0.5 - 10 µL/min)
Micro LC (5 - 50 µL/min)
Fuses kit, including:
10 fuses, 4A, slow-blow, 5 x 20 mm (for use in the NCS)
10 fuses, overload protection, 2A, slow-blow, 5 x 20 mm (for use in the NCP)
5 fuses, 4A, slow-blow, 6.3 x 32 mm
Inline filter (with filter frit, porosity: 2 µm) for loading pump
Inline filter, filter frits → Filter frits, inline filter
Installation tool for Viper capillaries with torque toothing
Installation tool for Viper capillaries with torque toothing
→ Tool, installation tool for Viper capillaries with torque toothing
Maintenance kit for NCS-3500RS loading pump—including:
4 solvent supply line filters with filter frits
1.5 m silicone tubing (O.D. x I.D. 2.80 mm x 1.30 mm)
18 cm PharMed tubing (O.D. x I.D. 3.2 mm x 1.6 mm)
3 tubing connectors, straight, for I.D. 1.0-2.0 mm
2 piston seals (reversed phase), main piston seals
2 piston seals, for plate of seal wash system
2 support rings
1 O-Ring seal each (PTFE; 9x1.5 and 32x1.5), for seal wash system
1 filter frit (titanium, biocompatible, 2 µm) for inline filter
1 valve cartridge
1 cap seal for purge screw (to be used only for screws without integrated cap seal)
5 cleaning swabs
Menu pen
Page 244
Part No.
6041.0004
6041.0001
6040.0005
6268.0117
6268.0036
6040.2303
6041.7850
6041.7902A
6041.7903A
6041.0003
6041.0014
6820.0026
6042.5014
6040.2314
6042.1951
6300.0100
Operating Instructions