Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual page 248

UltiMate 3000 Series:
NCS-3500RS and NCP-3200RS
Description
Silicone tubing (2.80 mm O.D. x 1.30 mm I.D.)
Solvent reservoir (250 mL) or
Seal wash reservoir (250 mL)
(including bottle cap)
Solvent supply line (1.0 x 1000 mm I.D. x L)
Tip: This tube can be also be used to directly connect the
loading pump to the solvent reservoir.
In this case, also install an eluent filter with 10 µm PEEK
frit.
Solvent supply line filter, including:
1 Filter holder (top and bottom parts) and
1 filter frit (PEEK, porosity: 10 µm) + 2 spare frits
Tool kit for UltiMate 3000 RS, SD, BM pumps, and NCS-
3500RS/NCP-3200RS, including:
1 open-end wrench (size 1/4" x 5/16")
2 open-end wrenches (size 11 x 13 mm)
1 hexagon wrench (size 6 mm)
1 piston seal removal and insertion tool
1 pump head tool for RS/SD pumps and 1 pump head tool
for BM pumps and NCS-3500RS/NCP-3200RS (the tool is
required for establishing the distance during piston
installation)
Tubing connector (straight, for I.D. 1.0 - 2.0 mm)
USB cable, type A to type B, high speed USB 2.0
(cable length: 1 m)
USB cable, type A to type B, high speed USB 2.0
(cable length: 5 m)
Description
Accessories kit of the NCP-3200RS, including:
Capillary, nanoViper, MP35N (0.25 x 155 mm I.D. x L)
To be used, for example, for calibrating solvents with the
ProFlow flow meter or establishing the solvent viscosity
with the Classic flow meter or for purging the flow meter.
Chromeleon software DVD
Page 240
Part No.
6007.9100
included in 2270.0026
6041.2540
Included in 6268.0115
Included in 6268.0117
6007.9304
Included in 6040.9502
6035.9035
6911.0002
Part No.
6041.7892
Operating Instructions
Quantity
in the kit
3 m
3
1
3
1
5
1
1
Quantity
in the kit
1
1