Timers Spf - SMC Networks SMC8748ML3 Management Manual

- If you do not use the always keyword, the router can only advertise a
default external route into the AS if the redistribute command is used
to import external routes via RIP or static routing, and such a route is
known.
• Type 1 route advertisements add the internal cost to the external route
metric. Type 2 routes do not add the internal cost metric. When
comparing Type 2 routes, the internal cost is only used as a tie-breaker if
several Type 2 routes have the same cost.
Example
This example assigns a metric of 20 to the default external route advertised
into an autonomous system, sending it as a Type 2 external metric.
Console(config-router)#default-information originate metric 20
metric-type 2
Console(config-router)#
Related Commands
ip route (4-319)
redistribute (4-347)

timers spf

This command configures the hold time between making two consecutive
shortest path first (SPF) calculations. Use the no form to restore the default
value.
Syntax
timers spf spf-holdtime
no timers spf
spf-holdtime - Minimum time between two consecutive SPF
calculations. (Range: 0-65535 seconds)
Command Mode
Router Configuration
Default Setting
10 seconds
IP R C
OUTING OMMANDS
4-343