Igmp Query Commands (Layer 2); Ip Igmp Snooping Querier; Table 4-67 Igmp Query Commands (Layer 2) - SMC Networks 6824MPE INT Management Manual

Example
The following shows the multicast entries learned through IGMP snooping
for VLAN 1:
Console#show mac-address-table multicast vlan 1 igmp-snooping
VLAN M'cast IP addr. Member ports Type
---- --------------- ------------ -------
1
Console#

IGMP Query Commands (Layer 2)

Command

ip igmp snooping querier

ip igmp snooping
query-count
ip igmp snooping
query-interval
ip igmp snooping
query-max-response-time
ip igmp snooping
router-port-expire-time
ip igmp snooping querier
Use this command to enable the switch as an IGMP querier. Use the no
form to disable it.
Syntax
[no] ip igmp snooping querier
Default Setting
Enabled
Command Mode
224.1.2.3

Table 4-67 IGMP Query Commands (Layer 2)

Function
Allows this device to act as the querier
for IGMP snooping
Configures the query count
Configures the query interval
Configures the report delay
Configures the query timeout
M
ULTICAST
Eth1/11 IGMP
F C
ILTERING OMMANDS
Mode Page
GC
GC
GC
GC
GC
4-265
4-266
4-267
4-268
4-269
4-265