NEC 78K0 Series User Manual page 227

CHAPTER 7 16-BIT TIMER/EVENT COUNTERS 00 AND 01
Figure 7-49. Example of Register Settings for One-Shot Pulse Output Operation (2/2)
(e) 16-bit timer counter 0n (TM0n)
By reading TM0n, the count value can be read.
(f) 16-bit capture/compare register 00n (CR00n)
This register is used as a compare register when a one-shot pulse is output. When the value of TM0n
matches that of CR00n, an interrupt signal (INTTM00n) is generated and the output level of the TO0n pin is
inverted.
(g) 16-bit capture/compare register 01n (CR01n)
This register is used as a compare register when a one-shot pulse is output. When the value of TM0n
matches that of CR01n, an interrupt signal (INTTM01n) is generated and the output level of the TO0n pin is
inverted.
Caution Do not set identical values or 0000H for CR0n0 and CR0n1.
µ
Remark n = 0: PD78F0531, 78F0532, 78F0533
µ
n = 0, 1: PD78F0534, 78F0535, 78F0536, 78F0537, 78F0537D
Preliminary User's Manual U17260EJ3V1UD
227