Vacon optea Installation Manual page 58

vacon • 58
Name
Subnet mask P1*
Subnet mask P2*
Subnet mask P3*
Subnet mask P4*
Default GW P1*
Default GW P2*
Default GW P3*
Default GW P4*
Speed/Duplex*
Sub menu: EtherNet/IP
EIP Output
Instance*
EIP Input
Instance*
EIP Product Code
Offset
Sub menu: Modbus
Modbus Unit Iden-
tifier*
Sub menu: PROFINET IO
PNIO Name Of Sta-
tion
NOS Device ID
Sub menu: SNTP
6
Default Range
255 0...255
255 0...255
255 0...255
255 0...255
192 0...255
168 0...255
0 0...255
1 0...255
Autoneg. (1),
10 HD (2),
Autonegotia-
10 FD (3),
tion
100 HD (4),
100 FD (5)
"20" (1),
"21" (2),
"23" (3),
"25" (4),
"101" (5),
21
"111" (6),
"128" (7),
"131" (8)
"151" (9),
"161" (10)
"70" (1),
"71" (2),
"73" (3),
"75" (4),
"107" (5),
71
"117" (6),
"127" (7),
"137" (8)
"157" (9),
"167" (10)
0 0...99
255 1...247, 255
"" 1...240 char
0 0...65535
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
Description
Subnet Mask Part 1
Subnet Mask Part 2
Subnet Mask Part 3
Subnet Mask Part 4
Default Gateway Part 1
Default Gateway Part 2
Default Gateway Part 3
Default Gateway Part 4
Ethernet link speed/duplex selection. It is
recommend to use autonegotiation.
EtherNet/IP output assembly instance.
Shows the active output instance. The
instance is selected during the IO connec-
tion open request.
This parameter was removed in newer
firmware versions and replaced with mon-
itoring value.
EtherNet/IP input assembly instance.
Shows the active input instance. The
instance is selected during the IO connec-
tion open request.
This parameter was removed in newer
firmware versions and replaced with mon-
itoring value.
Modbus Unit Identifier. Used only with
Modbus UDP.
For Profinet IO only. Only visible in
®
VACON 100 family AC drives.
Name Of Station device identification
number.
®
Not visible in VACON 100 family AC
drives.
Commissioning