Vacon optea Installation Manual page 153

EtherNet/IP
9.2.1.4.1. I
NSTANCE
Instance Attribute "Status"
This attribute presents the status of the TCP/IP network interface.
Bit(s) Called
Interface Con-
0-3
figuration Status
4 Mcast Pending
Interface Con-
5 figuration Pend-
ing
6 AcdStatus
7-31 Reserved
Instance Attribute "Configuration Capability"
This attribute presents the capability flags (that is, the support for the optional network
configuration capability) of the TCP/IP network interface.
Bit(s)
0
1
2
3 DHCP-DNS Update
4 Configuration Settable
5 Hardware Configurable
Interface Configuration Change
6
7
8-31
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
A
TTRIBUTES
Table 117. Status Bit Descriptions
Indicates the
status of the
interface config-
uration attribute
Indicates a pending configuration change in the TTL Value and/
Indicates a pending configuration change in the Interface Con-
Set(1) Address Conflict Detected, Clear(0) No Address Conflict
Table 118. Configuration capability bit descriptions
Called
BOOTP Client
DNS Client
DHCP Client
Requires Reset
AcdCapable
Reserved
Definition
Value
The Interface Configuration
0
Attribute has not been configured
The Interface Configuration
Attribute contains valid configura-
1
tion obtained from BOOTP, DHCP
or non-volatile storage.
The IP address member of the
Interface Configuration Attribute
2
contains valid configuration,
obtained from hardware settings
3-15 Reserved for future use
or Mcast Config attributes.
figuration attribute.
Detected
Always zero
Definition
Supports BOOTP (FALSE)
Supports capable of resolving DNS names
(FALSE)
Supports DHCP (TRUE)
Always zero
TRUE, if configuration settable
Configuration can be obtained from hardware
settings (FALSE)
Configuration change results in reset (FALSE)
Supports ACD (TRUE)
Reserved, always zero
vacon • 153
Definition
9