Vacon optea Installation Manual page 142

vacon • 142
Code
21 / 15
d h
Embedded service
30 / 1E
d h
31 / 1F
Vendor specific error
d h
32 / 20
Invalid parameter
d h
38 / 26
Path Size Invalid
d h
29
Member not settable A request to modify a non-modifiable member was received.
h
Service Not Supported
46 / 2E
d h
for Specified Path
9.1.5.3 Connection Manager Object Error codes
These are the extended status codes used when the general status code is 1.
Extended Status
256
d
259
d
262
d
263
d
264
d
265
d
272
d
273
d
274
d
275
d
276
d
277
d
278
d
279
d
280
d
281
d
283
d
294
d
295
d
9
Table 108. General CIP error codes
Status name
Too much data The service supplied more data than was expected.
An embedded service resulted in an error.
error
A vendor specific error has been encountered. The Additional
Code Field of the Error Response defines the particular error
encountered.
A parameter associated with the request was invalid.
The size of the path which was sent with the Service Request
is either not large enough to allow the Request to be routed
to an object or too much routing data was included.
The object supports the service, but not for the designated
application path (e.g. attribute).
Table 109. Connection Manager Object Error codes
/ 100
h
/ 103
Transport class and trigger combination not supported
h
/ 106
h
/ 107
h
/ 108
h
/ 109
h
/ 110
h
/ 111
h
/ 112
h
/ 113
h
/ 114
h
/ 115
h
/ 116
h
/ 117
Invalid produced or consumed application path
h
/ 118
Invalid or inconsistent configuration application path
h
/ 119
h
/ 11B
RPI is smaller than the production inhibit time
h
/ 126
h
/ 127
h
Description
Descriptions
Connection in use or duplicate forward open
Ownership conflict
Target connection not found
Invalid network connection parameter
Invalid connection size
Target for connection not configured
RPI not supported
RPI value(s) not acceptable
Out of connections
Vendor id or product code mismatch
Product type mismatch
Revision mismatch
Non-listen only connection not opened
Invalid configuration size
Invalid originator to target size
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
EtherNet/IP