Vacon optea Installation Manual page 229

APPENDIX 2 - EXAMPLE WITH SIEMENS PLC vacon • 229
12. Select the inserted safety telegram to edit the safe fieldbus parameters. You need to set the
same safe fieldbus parameters here which were used when creating safety configuration with VA-
® ®
CON Safe PC tool. For example, the F_iPar_CRC was calculated with the VACON Safe PC tool.
12. When the safety telegram is added, TIA Portal shows a yellow circle with a red dot to indicate
that safety features are used with this device.
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
12