Vacon optea Installation Manual page 159

EtherNet/IP
Instance Attribute "Interface Counters"
The attribute is a collection of counters related to the Ethernet physical interface. The dual port
option board has only single MAC address and therefore implements only single set of counter
values. Only packets sent or received by the device itself are counted.
Field name
In Octets
In Unicast Packets
In NonUnicast Packets
In Discards
In Errors
In Unknown Protocols
Out Octets
Out Unicast Packets
Out NonUnicast Pack-
ets
Out Discards
Out Errors
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
Table 126. Interface counters
Data type
The number of octets received on the inter-
UDINT
face (including framing characters).
The number of unicast packets received on
UDINT
The number of non-unicast packets received
UDINT
Inbound packets received on the interface but
UDINT
Inbound packets received on the interface but
UDINT
which contained errors (excluding Discards).
Inbound packets received on the interface
UDINT
which belonged to unknown protocols.
The number of octets sent on the interface
UDINT
(including framing characters).
The number of unicast packets requested to
UDINT be transmitted on the interface, including
those that were discarded or not sent.
The number of non-unicast packets requested
UDINT to be transmitted on the interface, including
those that were discarded or not sent.
UDINT Outbound packets which were discarded.
Outbound packets which contained errors
UDINT
Description
the interface.
on the interface.
which were discarded.
(excluding Discards).
vacon • 159
9