Vacon optea Installation Manual page 161

EtherNet/IP
Instance Attribute "Admin State"
The attribute indicates the ability to use the Ethernet interface for administration, for example, for
changing the settings.
For this attribute, only value "administration enabled" (01h) is supported. An attempt to disable tthe
administration (by writing value 02
9.2.1.6 Assembly Object, Class 0x04
The assembly object groups (or assembles) the attribute values into a single block of data.
Class name
Class identifier
Id
1
Class
2
Attributes
3
Id
1
Class Ser-
vices
14
d
0E
h
Id
3
Instance
Attributes
4
Id
14
d
Instance
0E
h
Services
16
d
10
h
9.2.1.6.1. I
NSTANCE
Instance Attribute "Data"
This attribute can be used to get assembly data. The content and length of the data depends on the
configuration of the assembly instance.
Instance Attribute "Size"
This attribute can be used to get assembly data size.
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
) will result in an error.
h
Table 129. Assembly object
Assembly object
4
Access rule Name
Get Revision
Get Max Instance
Number of
Get
Instances
Name
Get_Attributes_All
Get_Attribute_Single
Access rule Name
Set
Get
Name
Get_Attribute_Single
Set_Attribute_Single
A
TTRIBUTES
Datatype
UINT
UINT
UINT
Returns content of all (implemented)
attributes in the class.
Used to read single attribute value.
Datatype
ARRAY of
Data
BYTE
Size UINT
Used to read single attribute value
Used to write a single attribute value
vacon • 161
Description
Class revision (2)
Maximum instance num-
ber (167 )
d
Number of object
instances (23)
Description
Description
Assembly data
Number of bytes in
attribute 3 (assembly
data)
Description
9