Vacon optea Installation Manual page 177

EtherNet/IP
For the OPTE9, the revision of the object is 2.
Class name Fault history object
162
Class identifier
Id
1
Class
2
Attributes
3
Id
1
Class Ser-
vices 5
14
d
0E
h
Id
1
2
Instance 3
Attributes
4
5
6
Id
1
Instance
Services
14
d
0E
h
9.2.2.4.1. C
HANGES FROM REVISION
The attributes FaultCode and FaultDay were changed from 8 bit to 16 bit.
9.2.2.4.2. C A
LASS
Class Attribute "Revision"
This attribute presents the revision of the Fault History Object which is implemented by the device.
The current revision is 2.
Class Attribute "Max Instance"
This attribute presents the maximum number of instances that can exist of the Fault History Object
in the device. The maximum value is 40.
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
Table 152. Fault history object
/ A2
d h
Access rule Name
Get Revision
Get Max Instance
Number of
Get
Instances
Name
Get_Attributes_All
Reset
Get_Attribute_Single
Access rule Name
Get FaultCode
Get FaultID
Get FaultYear
Get FaultMonth
Get FaultDay
FaultMillisAfter
Get
Midnight
Name
Get_Attributes_All
Get_Attribute_Single
1
TO REVISION
TTRIBUTES
Datatype
UINT
Maximum instance number
UINT
Number of object instances.
UINT
Depends on drive type.
Description
Returns content of all (implemented)
attributes in the class.
Reset fault history
Used to read single attribute value.
Datatype
UINT Fault code
UINT Fault ID
UINT Fault date: Year
USINT Fault date: Month
UINT Fault date: Day
Fault date: Time, millisec-
UDINT
onds after midnight
Description
Returns content of all (implemented)
attributes in the instance
Used to read single attribute value
2
vacon • 177
Description
Class revision (2)
(40)
Description
9