Vacon optea Installation Manual page 173

EtherNet/IP
The old format of the message is as follows (OPTCQ option board):
9.2.2.2 Assembly Instance Selector Object, Class 0xBE
The Assembly Instance Selector Object is a vendor-specific object. It allows the user to get and set
the input and output instances used.
The option board will automatically change the current assembly instances by what is requested in
the connection opening. This means that it is not required to pre-set assembly instances.
Class name
Class identifier
Id
Class
Attributes
-
Id
Class Ser-
vices
-
Id
Instance 3
Attributes
4
Id
14
d
Instance
0E
h
Services
16
d
10
h
9.2.2.2.1. I
NSTANCE
Instance Attribute "InputInstance"
This attribute shows the currently active (or what was last used) input assembly instance id.
Instance Attribute "OutputInstance"
This attribute shows the currently active (or what was last used) output assembly instance id.
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
Table 141.
Field
Service Code
Class Code
Instance Number
Attribute ID
Attribute Data
Table 142. Assembly instance selector object
Assembly instance selector object
190 / BE
d h
Access rule Name
-
Name
-
Access rule Name
Get/Set InputInstance
Get/Set OutputInstance
Name
Get_Attribute_Single
Set_Attribute_Single
A
TTRIBUTES
Data
10
h
A0
h
YY
h
XX
h
Parameter-specific
Datatype
- -
Description
Datatype
USINT Input assembly instance
Output assembly
USINT
instance
Description
Used to read single attribute value.
Used to write a single attribute value.
vacon • 173
Description
-
-
Description
9