Vacon optea Installation Manual page 84

vacon • 84
7.3.2.5.6.
This register holds the value for resettable control unit operating time counter (trip value). The
values are read only.
For resetting this counter see Chapter 7.3.2.2 "Clearing resettable counters".
NOTE! The feature Resettable operation day counter does not work with VACON
®
or VACON 20 CP AC drives.
Resettable operation day counter as seconds
This counter in registers 40111
in a 32-bit unsigned integer.
Address
40111 High data
40112 Low data
Resettable operation day counter
This counter in registers 40101
For compatibility with VACON
this counter is found from two different register areas: holding registers 40101
registers 30101
d
7
Table 37. Operation day counter
Holding register
addres
40001
40002
40003
40004
40005
R
ESETTABLE OPERATION DAY COUNTER
to 40112
d
Table 38. Resettable operation days counter as seconds
Holds the counter value as seconds.
to 40105
d
®
100 family internal Modbus TCP/UDP and the OPT-CI option board,
to 30105 .
d
Table 39. Resettable operation day counter
Holding register
addres
40101
40102
40103
40104
40105
Input register
Purpose
address
1
2
3
4 Minutes
5 Seconds
holds the value of resettable operation days as seconds
d
Description
holds the value of operation days counter.
d
Input register
Purpose
address
101
102
103
104 Minutes
105 Seconds
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
Modbus TCP / Modbus UDP
Years
Days
Hours
®
20, VACON
to 40105
d
Years
Days
Hours
®
20 X
and input
d