Vacon optea Installation Manual page 151

EtherNet/IP
Id
1
14
d
Instance
0E
h
Services
78
d
4E
h
84
d
54
h
9.2.1.3.1. S
ERVICES
Instance Service "Forward Open"
The Forward Open service is used to open a connection to a target device. If the path between
devices consists of multiple links, then local connections between these are also established.
The minimum time for the RPI (Request Packet Interval) is 1 ms. The connection object instance
number is 103 (67 ) except when emulating the OPTCQ option board. Then connection object
d h
instance number is 1.
Instance Service "Forward Close"
The Forward Close service is used to close a connection between two devices (and all nodes in the
connection path).
9.2.1.4 TCP/IP Interface Object, Class 0xF5
The TCP/IP Interface Object provides an interface to configure the device's TCP/IP settings. With this
object, you can configure, for example, the device's IP address, network mask and so on.
Class name TCP / IP object
245
Class identifier
Id
1
Class
2
Attributes
3
Id
1
Class Ser-
vices
14
d
0E
h
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
Table 115. Connection manager object
Name
Get_Attributes_All
Get_Attribute_Single
Forward_Open
Forward_Close
Table 116. TCP/IP interface object
/ F5
d h
Access rule Name
Get Revision
Get Max Instance
Number of
Get
Instances
Name
Get_Attributes_All
Get_Attribute_Single
Description
Returns content of all (implemented)
attributes in the instance
Used to read the single attribute value
Opens a connection (maximum data size
is 511 bytes)
Closes a connection
Datatype Description
UINT Class revision (4)
Maximum instance number
UINT
Number of object
UINT
instances(1)
Description
Returns content of all (implemented)
attributes in the class.
Used to read single attribute value.
vacon • 151
(1)
9