Vacon optea Installation Manual page 134

vacon • 134
®
The VACON data (faults, alarms, infos) mapped to PROFINET IO alarms is slightly different based
on the used AC drive:
AC drive type
®
VACON NXP/NXS
®
VACON 100 family
®
VACON 20 family
Diagnostic messages are always sent from the PROFINET module (slot 1). Exception to this is that
PROFIsafe diagnostics are sent from PROFIsafe module (slot 2). VACON
PROFINET IO alarms according to the following table:
AC drive Type
VACON
®
VACON
VACON
PROFIsafe
8
Figure 48. Siemens TIA portal - Alarm description and help text
Table 100. VACON® data in different AC drives
Fault
Yes
Yes
Yes
Channel Error
®
1000 + Fault code
NXP/NXS
2000 + Fault code
100 family
®
3000 + Fault code
20 family
4000 + Fault code
Alarm
Yes
Yes, from version:
• FW0072V026 (INDUSTRIAL)
• FW0159V017 (FLOW)
No
Table 101.
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
PROFINET IO
Info
No
No
No
®
faults are mapped to
Extended Channel Error
Subcode
Fault Id
Subcode
Subcode