Vacon optea Installation Manual page 121

PROFINET IO
Octet
Field name
number
3 Error Code 1
4 Error Code 2
8.4.6.2 PROFIdrive 4.1 error classes and codes
The table below lists PROFIdrive profile 4.1 error classes and codes.
Error class Error codes
0x0...0x9 = reserved (not used)
0x0 = read error
0x1 = write error
0x2 = module failure
0x3...0x7 = reserved (not
0xA = applica-
used)
tion
0x8 = version conflict
0x9 = feature not supported
0xA...0xF = user-specific
(not used)
0xB = access 0x0 = invalid index
0x1 = write length error
0x2 = invalid slot
0x3 = type conflict
0x4 = invalid area
0x5 = state conflict
0x6 = access denied
0x7 = invalid range
0x8 = invalid parameter
0x9 = invalid type
0xA...0xF = user-specific
(not used)
0x0 = read constraint con-
flict
0x1 = write constraint con-
flict
0x2 = resource busy
0xC = resource
0x3 = resource unavailable
0x4...0x7 = reserved (not
used)
0x8...0xF = user-specific
(not used)
0xD...0xF = user-specific (not used)
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
Description
High 4 bits indicate error
class, 4 lower bits indicate
error code.
Application-specific.
Table 85. PROFIdrive 4.1 error classes and codes
PROFIdrive meaning
0xB0 = parameter requests are not supported.
0xB5 = parameter access is temporarily not possi-
ble due to internal processing status.
0xB7 = Write request with error in the parameter
request header.
Allowed values
See Chapter 8.4.6.3 "PROFIdrive
Parameter Access errors"
Always 0 in PROFIdrive.
vacon • 121
8