Vacon optea Installation Manual page 50

vacon • 50 Installation
Figure 22. Change the option board settings
Step 4. Change the protocol settings.
To change the currently active protocol, select the setting from the tree structure. A dialog box
opens. Select the desired protocol from the dropdown list (Figure 23). After clicking "ok" the setting
will be activated.
The rest of the settings can be changed similarly, but values are edited in the tree (Figure 24). See
Chapter 6 "Commissioning" for more information about the settings.
Figure 23. Change the currently active protocol value
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
5