Vacon optea Installation Manual page 147

EtherNet/IP
9.2.1.1.1. I
NSTANCE
Instance Attribute "Vendor ID"
This number is assigned to vendors of CIP devices by the ODVA user organization. The vendor ID for
®
VACON Ltd is 01BB (443
h
Instance Attribute "Device Type"
This attribute indicates which device profile is implemented by the device. For VACON
this device number is 02
Instance Attribute "Product Code"
This attribute reveals the vendor-assigned product code for a particular product within a device
type.
Separate products must have different product codes if their configuration and/or runtime options
are different.
Option board will return the product code value based on the AC drive where it has been installed.
This value can also be modified with the "Product Code Offset" parameter (see Chapter 6
"Commissioning").
When the "Mode" setting is set to "NX Mode" or to "OPTCx Mode", setting the "Product Code Offset"
has no affect and board will emulate the OPTCQ option board and return value to 2. The same
functionality applies to the "V100 Mode", except that the product code will be 100.
AC drive type
®
VACON
®
VACON 100 INDUSTRIAL
®
VACON NXP
®
VACON 20 x
®
VACON 100 FLOW
®
VACON 100 X
®
VACON NXS
Emulating OPTCQ
Emulating V100
Instance Attribute "Revision"
This attribute, which consists of the Major and Minor Revision fields, identifies the revision of the
item/ device that the Identity Object is representing. The Major Revision is limited to values between
1 and 127, as the eighth bit is reserved by CIP and is zero.
Instance Attribute "Status"
The value of the attribute presents the current status of the entire device. The coding of the field is
defined in the following table.
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
A
TTRIBUTES
).
d
("AC Drive" profile).
h
Table 112. AC drive Type Specific Product Code Values
20
Product Code Base Value
OPTEA
-
2100
2200
-
2400
2500
2600
2
100
vacon • 147
®
AC drives
OPTE9
1000
1100
1200
1300
1400
1500
1600
2
100
9