Vacon optea Installation Manual page 143

EtherNet/IP
Extended Status
296 / 128
d h
297 / 129
d h
298 / 12A
d h
299 / 12B
d h
306 / 132
d h
517 / 205
d h
789 / 315
d h
Range 320h – 7FFh are vendor specific
800 / 320
d h
64258 / FB02
d
64259 / FB03
d
64260 / FB04
d
64261 / FB05
d
64262 / FB06
d
64263 / FB07
d
64267 / FB0B
d
64268 / FB0C
d
64270 / FB0E
d
9.1.5.4 Supported CIP and Vendor Objects
The Communication Interface supports the following object classes.
Type
Required by Ether-
Net/IP
Required by Drive
Profile
Vendor-Specific
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
Table 109. Connection Manager Object Error codes
Invalid target to originator size
Invalid configuration application path
Invalid consuming application path
Invalid producing application path
Null forward open function not supported
Parameter error in unconnected request service
Invalid segment in connection path
h
Internal: Bad originator to target net parameter
h
Internal: Bad target to originator net parameter
h
h
h
h
h
h
h
Table 110. CIP Objects
Class
1
2 Message Router Object
4
6 Connection Manager Object
245d / F5h TCP/IP Interface Object
246d / F6h
40d / 28h
41d / 29h Control Supervisor Object
42d / 2Ah
160d / A0h Vendor Parameters Object
161d / A1h Motor Control Mode Object
162d / A2h
Assembly Instance Selector
190d / BEh
Descriptions
Internal: Connection disabled
Internal: Bad socket
Internal: Bad UDP port
Internal: Join multicast
Internal: Prepare IO packet
Internal: Consumption
Internal: FW close
Internal: Adapter stopped
Object
Identity Object
Assembly Object
Ethernet Link Object
Motor Data Object
AC/DC Drive Object
Fault History Object
Object
vacon • 143
Details
See chapter 9.2.1.1
See chapter 9.2.1.2
See chapter 9.2.1.6
See chapter 9.2.1.3
See chapter 9.2.1.4
See chapter 9.2.1.5
See chapter 9.2.1.7
See chapter 9.2.1.8
See chapter 9.2.1.9
See chapter 9.2.2.1
See chapter 9.2.2.3
See chapter 9.3.3.3
See chapter 9.2.2.2
9