Support Menu - Epson C2600/2600 Owner's Manual

If you select BarCode, the printer converts bit images to bar codes
by automatically filling in any vertical gaps between dots. This
produces unbroken vertical lines that can be read by a bar code
reader. This mode will reduce the size of the image being printed,
and may also cause some distortion when printing bit image
graphics.
ZeroChar
Selects whether the printer prints a slashed or unslashed zero.
CharacterSet
Selects character table 1 or 2.

Support Menu

Enter the Support Mode by pressing the d Down button while
turning the printer on, to make the Support Menu appears.
HDD format
Formats the Hard Disk Drive in the printer, if one is installed.
PS3 HDD Init
Initializes the Hard Disk Drive area where PostScript information
is stored, if a Hard Disk Drive is installed.
Sleep Mode
Set the time after which the printer enters the sleep mode if the
printer is not operated.
LCD Backlight
Using the Control Panel
7
7
7
7
7
7
7
7
7
7
7
7
259