Section 2. Details On Settings; References Of Firmware Versions; Settings Of Dip Switches; Port Information - Epson TM-T82XM Development Manual

Section 2. Details on Settings

This section describes connection configurations and how to make the settings for the
TM-T82XM/TM-T81IIIM/TM-T82IIIL/TM-T83III Series printers.

2.1 References of Firmware Versions

Refer to the release notes (Relnote.txt/SupportedDevicesList.txt).
2.2 Settings of Memory Switches
Please check device specification sheet.

2.3 Port Information

1) Port information when serial port is used
The port information that can be set with the SetupPOS utility is as follows.
Baud rate [bps]
Bit length [bit]
Parity
Stop bit [bit]
Handshake
The default settings are as shown in the following table.
Baud rate [bps]
Bit length [bit]
Parity
Stop bit [bit]
Handshake
The baud rate setting of device is set using the Utility.
For details, please refer to the "Utility User's Manual".
2) Port information when using USB port
Not applicable
3) Port information when using Ethernet port
Not applicable
POSPrinter (TM-T82XM/TM-T81IIIM/TM-T82IIIL/TM-T83IIIM)
Item
2400, 4800, 9600, 19200, 38400, 57600,
115200
8
NONE, ODD, EVEN
1
DTR/DSR
Item
38400
8
NONE
1
DTR/DSR
2
APPLICATION DEVELOPMENT GUIDE
Version 3.00 Apr. 2021
Setting range
Setting range