Editing File Transfer Processes Using Spmaint - HPE 3PAR StoreServ Software User's Manual

Control parameter name
Max Files in Group
Scrub Weekly Files (replaced with Enable Scrubber
option starting SP-4.4.0 MU4)
Enable scrubber (replaces Scrub weekly files
option starting SP-4.4.0 MU4)
Max Files before Transfer
Filetypes to Transfer First
FIFO/LIFO
Max File Size before File Split (Kb) — Modem
File Split Size (Kb) — Modem
Max File Size to Transfer (MB) — Modem
Delay Before Closing Group
The following section describes the file transfer options and how to modify them using SPMAINT.

Editing File Transfer Processes using SPMAINT

NOTE: These values should be changed only with guidance from an authorized Hewlett Packard
Enterprise support provider.
To access the SP Process Control Parameters submenu using SPMAINT:
Procedure
1. From the SPMAINT main menu, enter 1 for SP Control/Status, then press ENTER.
2. Enter 15 for SP Process Control Parameters, then press ENTER.
Use the SP Process Control Parameters submenu to edit the file transfer processes parameters for the
SP.
SP Process Control Parameters lists all parameters by ID number, provides their default values, and
notes how they are impacted when their values are edited.
Description
Maximum number of files that can be grouped
together for transfer.
Perform a weekly file scrub.
Perform real time scrubbing of files.
Perform a transfer when this number of files are
queued.
File types that should be transferred first (there is a
maximum of five file types, and they should be in a
comma-separated list).
Use Last In First Out (LIFO) when selecting the
next file to transfer.
Maximum size, in kilobytes, of a file to transfer over
modem.
When a file's size exceeds the maximum modem
size, break the file down into parts this size, in
kilobytes.
Maximum size, in megabytes, of a file queued for
transfer via modem.
Larger files are kept for 14 days.
Wait this number of seconds before closing the
current file group.
SP Control/Status Functions 23