Edit/Remove User; Editing Or Removing User Accounts; Setting Options - HPE ProLiant Gen9 User Manual

5. Complete each entry for the new user, and press Enter.
6. Create as many user accounts as needed, and then press F10.

Edit/Remove User

Use this option to edit iLO user account settings, or to delete user accounts.

Editing or removing user accounts

Procedure
1. From the System Utilities screen, select System Configuration > iLO 4 Configuration Utility > User
Management > Edit/Remove User, and press Enter.
2. Select the Action menu for the user name you want to edit or delete, and press Enter.
3. Select one of the following, and press Enter.
a. No Change—Returns you to the main menu.
b. Delete—Deletes this user.
c. Edit—Edits the user.
4. Depending on your selection in Step 3, do one of the following:
a. If you selected No Change, no further action is needed.
b. If you selected Delete, the user name is marked to be deleted when you save the changes on this
page.
c. If you selected Edit, update the login name, password, or user permissions.
5. Update as many user accounts as needed, and then press F10.

Setting Options

Use this menu to view and configure iLO access settings.
• iLO 4 Functionality—Enables or disables the iLO 4 features. The iLO network and communications with
operating system drivers are terminated when iLO functionality is disabled.
NOTE:
The iLO functionality cannot be disabled on blade servers.
• iLO 4 Configuration Utility—Enables or disables the iLO 4 Configuration Utility. If this option is set to
Disabled, the iLO 4 Configuration Utility menu item is not available when you access the UEFI System
Utilities.
• Require Login for iLO 4 Configuration—Determines whether a user-credential prompt is displayed when
a user accesses the iLO 4 Configuration Utility. If this setting is Enabled, a login dialog box opens when
you access the iLO 4 Configuration Utility.
• Show iLO 4 IP Address during POST—Enables the display of the iLO network IP address during host
server POST.
Edit/Remove User 25