Authentication Ipoe - HP FlexNetwork MSR Series Command Reference Manual

Examples
# In ISP domain test, configure the device to perform local authentication through IKE extended
authentication.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication ike local
# In ISP domain test, perform IKE extended authentication based on RADIUS scheme rd and use
local authentication as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication ike radius-scheme rd local
Related commands
authentication default
local-user
radius scheme

authentication ipoe

Use authentication ipoe to configure the authentication method for IPoE users.
Use undo authentication ipoe to restore the default.
Syntax
In non-FIPS mode:
authentication ipoe { local [ none ] | none | radius-scheme radius-scheme-name [ local ]
[ none ] }
undo authentication ipoe
In FIPS mode:
authentication ipoe { local | radius-scheme radius-scheme-name [ local ] }
undo authentication ipoe
Default
The default authentication method for the ISP domain is used for IPoE users.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
local: Performs local authentication.
none: Does not perform authentication.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive
string of 1 to 32 characters.
Usage guidelines
You can specify one primary authentication method and multiple backup authentication methods.
18