Aaa-Fail Nobinding Enable - HP FlexNetwork MSR Series Command Reference Manual

Portal commands
WLAN is not supported on the following routers:
•
MSR4060.
•
MSR4080.
Commands and descriptions for centralized devices apply to the following routers:
•
MSR1002-4/1003-8S.
•
MSR2003.
•
MSR2004-24/2004-48.
•
MSR3012/3024/3044/3064.
•
MSR954 (JH296A/JH297A/JH298A/JH299A/JH373A).
•
MSR958 (JH300A/JH301A).
Commands and descriptions for distributed devices apply to MSR4060 and MSR4080 routers.
The term "AP" in this document refers to MSR routers that support WLAN.

aaa-fail nobinding enable

Use aaa-fail nobinding enable to enable AAA failure unbinding.
Use undo aaa-fail nobinding enable to restore the default.
Syntax
aaa-fail nobinding enable
undo aaa-fail nobinding enable
Default
AAA failure unbinding is disabled.
Views
MAC binding server view
Predefined user roles
network-admin
Usage guidelines
If a portal user fails AAA in MAC-trigger authentication, the user cannot trigger authentication before
the MAC-trigger entry of the user ages out. After the MAC-trigger entry ages out, the user triggers
MAC-trigger authentication when it accesses the network.
After this feature is enabled, the device sets the MAC-trigger entry state for a user to unbound
immediately after the user fails AAA in MAC-trigger authentication. Before the user's MAC-trigger
entry ages out, the user can trigger normal portal authentication.
Examples
# Enable AAA failure unbinding for MAC binding server mts.
<Sysname> system-view
[Sysname] portal mac-trigger-server mts
[Sysname-portal-mac-trigger-server-mts] aaa-fail nobinding enable
204