Port-Security Intrusion-Mode - HP FlexNetwork MSR Series Command Reference Manual

Syntax
port-security enable
undo port-security enable
Default
Port security is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
You must disable global 802.1X and MAC authentication before you enable port security on a port.
Enabling or disabling port security resets the following security settings to the default:
•
802.1X access control mode is MAC-based.
•
Port authorization state is auto.
When online users are present on a port, disabling port security logs off the online users.
Examples
# Enable port security.
<Sysname> system-view
[Sysname] port-security enable
Related commands
display port-security
dot1x
dot1x port-control
dot1x port-method
mac-authentication

port-security intrusion-mode

Use port-security intrusion-mode to configure the intrusion protection feature so the port takes the
predefined actions when intrusion protection detects illegal frames on the port.
Use undo port-security intrusion-mode to restore the default.
Syntax
port-security intrusion-mode { blockmac | disableport | disableport-temporarily }
undo port-security intrusion-mode
Default
Intrusion protection is disabled.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
332