Display Attack-Defense Scan Attacker Ip - HP FlexNetwork MSR Series Command Reference Manual

2013::127f
2::5
1::5
Slot 2 in chassis 2:
IPv6 address
2013::127f
2::5
1::5
# (Centralized devices in standalone mode.) Display the number of IPv6 addresses protected by
flood attack detection and prevention in the attack defense policy abc.
<Sysname> display attack-defense policy abc flood ipv6 count
Totally 3 flood protected IP addresses.
# (Distributed devices in standalone mode/centralized devices in IRF mode.) Display the number of
IPv6 addresses protected by flood attack detection and prevention in the attack defense policy abc.
<Sysname> display attack-defense policy abc flood ipv6 count
Slot 1:
Totally 3 flood protected IP addresses.
Slot 2:
Totally 3 flood protected IP addresses.
# (Distributed devices in IRF mode.) Display the number of IPv6 addresses protected by flood attack
detection and prevention in the attack defense policy abc.
<Sysname> display attack-defense policy abc flood ipv6 count
Slot 1 in chassis 1:
Totally 3 flood protected IP addresses.
Slot 2 in chassis 2:
Totally 3 flood protected IP addresses.
Table 127 Command output
Field
Totally 3 flood protected IP
addresses
IPv6 address
VPN instance
Type
Rate threshold(PPS)
Dropped

display attack-defense scan attacker ip

Use display attack-defense scan attacker ip to display information about IPv4 scanning attackers.
Syntax
Centralized devices in standalone mode:
a012345678901234 SYN-ACK-FLOOD 100
-- ACK-FLOOD
-- ACK-FLOOD
VPN instance Type
a012345678901234 SYN-ACK-FLOOD 100
-- ACK-FLOOD
-- ACK-FLOOD
Description
Total number of the IPv6 addresses protected by flood attack detection
and prevention.
Protected IPv6 address.
MPLS L3VPN instance to which the protected IPv6 address belongs. If
the protected IPv6 address is on the public network, this field displays
hyphens (--).
Type of the flood attack.
Threshold for triggering the flood attack prevention, in units of packets
sent to the IPv6 address per second. If no rate threshold is set, this field
displays the default value 1000.
Number of dropped attack packets. If the prevention action is logging, this
field displays 0.
100
100
Rate threshold(PPS) Dropped
100
100
840
4294967295
10
23
5465
0
122