HP FlexNetwork MSR Series Command Reference Manual page 825

Views
Object policy view
Predefined user roles
network-admin
Parameters
rule-id: Specifies a rule by its ID in the range of 0 to 65534.
text: Specifies a description, a case-sensitive string of 1 to 127 characters.
Usage guidelines
If the specified rule does not exist, this command fails.
If the rule does not have a description, this command configures the description. Otherwise, this
command overwrites the existing description for the rule.
Examples
# Create rule 0 for IPv4 object policy permit and configure a description for rule 0.
<Sysname> system-view
[Sysname] object-policy ip permit
[Sysname-object-policy-ip-permit] rule 0 pass source-ip ip1
[Sysname-object-policy-ip-permit] rule 0 comment This rule is used for source-ip ip1
Related commands
display object-policy ip
display object-policy ipv6
807