Portal Outbound-Filter Enable - HP FlexNetwork MSR Series Command Reference Manual
Comware 7 security
Hide thumbs
Also See for FlexNetwork MSR Series:
- Configuration manual (392 pages) ,
- Configuration manuals (159 pages)
Advertisement
Examples
# On VLAN-interface 2, specify the NAS-Port-Type value in RADIUS requests sent to the RADIUS
server as WLAN-IEEE 802.11.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] portal nas-port-type wireless
# On service template service1, specify the NAS-Port-Type value in RADIUS requests sent to the
RADIUS server as WLAN-IEEE 802.11.
<Sysname> system-view
[Sysname] wlan service-template service1
[Sysname-wlan-st-service1] portal nas-port-type wireless
Related commands
display portal interface
portal outbound-filter enable
Use portal [ ipv6 ] outbound-filter enable to enable outgoing packets filtering on a portal-enabled
interface.
Use undo portal [ ipv6 ] outbound-filter enable to disable outgoing packets filtering on a
portal-enabled interface.
Syntax
portal [ ipv6 ] outbound-filter enable
undo portal [ ipv6 ] outbound-filter enable
Default
Outgoing packets filtering is disabled. A portal-enabled interface can send any packets.
Views
Interface view
Predefined user roles
network-admin
Parameters
ipv6: Specifies outgoing IPv6 packets. If you do not specify this keyword, the command is for
outgoing IPv4 packets.
Usage guidelines
When you enable this feature on a portal-enabled interface, the device permits the interface to send
the following packets:
•
Packets whose destination IP addresses are IP addresses of authenticated portal users.
•
Packets that match portal-free rules.
Other outgoing packets on the interface are dropped.
Examples
# Enable outgoing packets filtering on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] portal outbound-filter enable
293
Advertisement
