Ipv6 - HP FlexNetwork MSR Series Command Reference Manual

Related commands
ldap server

ipv6

Use ipv6 to configure the IPv6 address and port number of the LDAP server.
Use undo ipv6 to restore the default.
Syntax
ipv6 ipv6-address [ port port-number ] [ vpn-instance vpn-instance-name ]
undo ipv6
Default
An LDAP server does not have an IPv6 address or port number.
Views
LDAP server view
Predefined user roles
network-admin
Parameters
ipv6-address: Specifies the IPv6 address of the LDAP server.
port port-number: Specifies the TCP port number of the LDAP server. The value range for the
port-number argument is 1 to 65535, and the default value is 389.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance to which the LDAP server
belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. If the
server is on the public network, do not specify this option.
Usage guidelines
The LDAP service port configured on the device must be consistent with the service port of the LDAP
server.
If you change the IP address and port number of the LDAP server, the change is effective only on the
LDAP authentication that occurs after the change.
Examples
# Specify the IPv6 address and port number as 1:2::3:4 and 4300 for LDAP server ccc.
<Sysname> system-view
[Sysname] ldap server ccc
[Sysname-ldap-server-ccc] ipv6 1:2::3:4 port 4300
Related commands
ldap server
ldap attribute-map
Use ldap attribute-map to create an LDAP attribute map and enter its view, or enter the view of an
existing LDAP attribute map.
Use undo ldap attribute-map to delete an LDAP attribute map.
Syntax
ldap attribute-map map-name
140