Accounting Default - HP FlexNetwork MSR Series Command Reference Manual

Default
The default accounting method of the ISP domain is used for command line accounting.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a
case-insensitive string of 1 to 32 characters.
Usage guidelines
The command line accounting feature works with the accounting server to record all valid commands
that have been successfully executed on the device.
Command line accounting can use only a remote HWTACACS server.
Examples
# In ISP domain test, perform command line accounting based on HWTACACS scheme hwtac.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting command hwtacacs-scheme hwtac
Related commands

accounting default

command accounting (Fundamentals Command Reference)
hwtacacs scheme
accounting default
Use accounting default to specify the default accounting method for an ISP domain.
Use undo accounting default to restore the default.
Syntax
In non-FIPS mode:
accounting
radius-scheme-name ] [ local ] [ none ] | local [ none ] | none | radius-scheme
radius-scheme-name [ hwtacacs-scheme hwtacacs-scheme-name ] [ local ] [ none ] }
undo accounting default
In FIPS mode:
accounting
radius-scheme-name ] [ local ] | local | radius-scheme radius-scheme-name [ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] }
undo accounting default
Default
The default accounting method of an ISP domain is local.
Views
ISP domain view
default { hwtacacs-scheme
default { hwtacacs-scheme
hwtacacs-scheme-name
hwtacacs-scheme-name
4
[ radius-scheme
[ radius-scheme