HP FlexNetwork MSR Series Command Reference Manual page 644

-i interface-type interface-number: Specifies an output interface by its type and number for SCP
packets. This option is used only when the server uses a link-local address to provide the SCP
service for the client. The specified output interface on the SCP client must have a link-local address.
get: Downloads the file.
put: Uploads the file.
source-file-name: Specifies the name of the source file.
destination-file-name: Specifies the name of the target file. If you do not specify this argument, the
target file uses the same file name as the source file.
identity-key: Specifies a public key algorithm for the client. The default is dsa in non-FIPS mode and
is rsa in FIPS mode. If the server uses publickey authentication, you must specify this keyword. The
client generates the digital signature by using the local private key that is associated with the
specified algorithm.
•
dsa: Specifies the public key algorithm dsa.
•
ecdsa: Specifies the public key algorithm ecdsa.
•
rsa: Specifies the public key algorithm rsa.
prefer-compress: Specifies the preferred compression algorithm between the server and the client.
By default, compression is not supported.
zlib: Specifies the compression algorithm zlib.
prefer-ctos-cipher: Specifies the preferred client-to-server encryption algorithm. The default is
aes128-cbc. Supported algorithms are des-cbc, 3des-cbc, aes128-cbc, and aes256-cbc, in
ascending order of security strength and computation time.
•
3des-cbc: Specifies the encryption algorithm 3des-cbc.
•
des-cbc: Specifies the encryption algorithm des-cbc.
•
aes128-cbc: Specifies the encryption algorithm aes128-cbc.
•
aes256-cbc: Specifies the encryption algorithm aes256-cbc.
prefer-ctos-hmac: Specifies the preferred client-to-server HMAC algorithm. The default is sha1.
Algorithms sha1 and sha1-96 provide stronger security but cost more computation time than
algorithms md5 and md5-96.
•
md5: Specifies the HMAC algorithm hmac-md5.
•
md5-96: Specifies the HMAC algorithm hmac-md5-96.
•
sha1: Specifies the HMAC algorithm hmac-sha1.
•
sha1-96: Specifies the HMAC algorithm hmac-sha1-96.
prefer-kex: Specifies
dh-group-exchange-sha1 in non-FIPS mode and dh-group14-sha1 in FIPS mode.
•
dh-group-exchange-sha1: Specifies the key exchange algorithm
diffie-hellman-group-exchange-sha1.
•
dh-group1-sha1: Specifies the key exchange algorithm diffie-hellman-group1-sha1.
•
dh-group14-sha1: Specifies the key exchange algorithm diffie-hellman-group14-sha1. The
algorithm dh-group14-sha1 provides stronger security but costs more computation time than
the algorithm dh-group1-sha1.
prefer-stoc-cipher: Specifies the preferred server-to-client encryption algorithm. The default is
aes128-cbc. Supported algorithms are the same as the client-to-server encryption algorithms (see
the prefer-ctos-cipher keyword).
prefer-stoc-hmac: Specifies the preferred server-to-client HMAC algorithm. The default is sha1.
Supported algorithms are the same as the client-to-server HMAC algorithms (see the
prefer-ctos-hmac keyword).
the preferred key
626
exchange algorithm. The default is