Authorization Ppp - HP FlexNetwork MSR Series Command Reference Manual

You can specify one primary authorization method and multiple backup authorization methods.
When the default authorization method is invalid, the device attempts to use the backup
authorization methods in sequence. For example, the authorization portal radius-scheme
radius-scheme-name local none command specifies the default RADIUS authorization method and
two backup methods (local authorization and no authorization). The device performs RADIUS
authorization by default and performs local authorization when the RADIUS server is invalid. The
device does not perform authorization when both of the previous methods are invalid.
Examples
# In ISP domain test, perform local authorization for portal users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization portal local
# In ISP domain test, perform RADIUS authorization for portal users based on scheme rd and use
local authorization as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization portal radius-scheme rd local
Related commands
authorization default
local-user
radius scheme

authorization ppp

Use authorization ppp to configure the authorization method for PPP users.
Use undo authorization ppp to restore the default.
Syntax
In non-FIPS mode:
authorization
radius-scheme-name ] [ local ] [ none ] | local [ none ] | none | radius-scheme
radius-scheme-name [ hwtacacs-scheme hwtacacs-scheme-name ] [ local ] [ none ] }
undo authorization ppp
In FIPS mode:
authorization
radius-scheme-name ] [ local ] | local | radius-scheme radius-scheme-name [ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] }
undo authorization ppp
Default
The default authorization method for the ISP domain is used for PPP users.
Views
ISP domain view
Predefined user roles
network-admin
ppp { hwtacacs-scheme
ppp { hwtacacs-scheme
hwtacacs-scheme-name
hwtacacs-scheme-name
34
[ radius-scheme
[ radius-scheme