Crypto Engine Commands - HP FlexNetwork MSR Series Command Reference Manual

Crypto engine commands

Commands and descriptions for centralized devices apply to the following routers:
•
MSR1002-4/1003-8S.
•
MSR2003.
•
MSR2004-24/2004-48.
•
MSR3012/3024/3044/3064.
•
MSR954 (JH296A/JH297A/JH298A/JH299A/JH373A).
•
MSR958 (JH300A/JH301A).
Commands and descriptions for distributed devices apply to MSR4060 and MSR4080 routers.
display crypto-engine
Use display crypto-engine to display crypto engine information, including crypto engine names and
supported algorithms.
Syntax
display crypto-engine
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
If the device does not have hardware crypto engines, this command displays information only about
software crypto engines.
Examples
# Display crypto engine information.
<Sysname> display crypto-engine
Crypto engine name: cavium crypto driver
Crypto engine state: Enabled
Crypto engine type: Hardware
Slot ID: 0
CPU ID: 0
Crypto engine ID: 0
Symmetric algorithms: des-ecb 3des-cbc 3des-ecb aes-cbc aes-ecb aes-ctr camellia_cbc
sha1 sha2-256 sha2-384 sha2-512 md5-hmac sha1hmac sha2-256-hmac sha2-384-hmac
sha2-512-hmac
Asymmetric algorithms: dh-group1 dh-group2 dh-group5 dh-group14 dh-group24
Random number generation function: Supported
Crypto engine name: Software crypto engine
Crypto engine state: Enabled
Crypto engine type: Software
960