Accounting-Method - HP FlexNetwork MSR Series Command Reference Manual

Usage guidelines
When accounting merge is enabled, the device merges accounting statistics for the ITA traffic of all
levels in the ITA policy. It reports the traffic as the lowest level of the policy to the accounting server.
Examples
# Enable the accounting merge feature for ITA policy ita1.
<Sysname> system-view
[Sysname] ita policy ita1
[Sysname-ita-policy-ita1] accounting-merge enable
Related commands
ita policy

accounting-method

Use accounting-method to configure the accounting method for an ITA policy.
Use undo accounting-method to restore the default.
Syntax
accounting-method { none | radius-scheme radius-scheme-name [ none ] }
undo accounting-method
Default
The default accounting method of an ITA policy is none.
Views
ITA policy view
Predefined user roles
network-admin
Parameters
none: Does not perform accounting.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive
string of 1 to 32 characters.
Usage guidelines
Use this command to configure accounting methods for an ITA policy. ITA accounting is separated
from accounting of other services.
You can specify one primary accounting method and one backup accounting method for an ITA
policy.
When the primary method is invalid, the device uses the backup method. For example, the
accounting-method radius-scheme radius-scheme-name none command specifies RADIUS
accounting as the primary method and no accounting as the backup method. The device performs
RADIUS accounting by default and does not perform accounting when the RADIUS server is invalid.
Examples
# Specify RADIUS accounting scheme radius1 for ITA policy ita1.
<Sysname> system-view
[Sysname] ita policy ita1
[Sysname-ita-policy-ita1] accounting radius-scheme radius1
150