Secondary Accounting (Hwtacacs Scheme View) - HP FlexNetwork MSR Series Command Reference Manual

Related commands
display hwtacacs scheme

secondary accounting (HWTACACS scheme view)

Use secondary accounting to specify a secondary HWTACACS accounting server.
Use undo secondary accounting to remove a secondary HWTACACS accounting server.
Syntax
secondary accounting { ipv4-address | ipv6 ipv6-address } [ port-number | key { cipher | simple }
string | single-connection | vpn-instance vpn-instance-name ] *
undo secondary accounting [ { ipv4-address | ipv6 ipv6-address } [ port-number | vpn-instance
vpn-instance-name ] * ]
Default
No secondary HWTACACS accounting servers are specified.
Views
HWTACACS scheme view
Predefined user roles
network-admin
Parameters
ipv4-address: Specifies the IPv4 address of the secondary HWTACACS accounting server.
ipv6 ipv6-address: Specifies the IPv6 address of the secondary HWTACACS accounting server.
port-number: Specifies the service port number of the secondary HWTACACS accounting server.
The value range for the TCP port number is 1 to 65535. The default setting is 49.
key: Specifies the shared key for secure communication with the secondary HWTACACS
accounting server.
cipher: Specifies the key in encrypted form.
simple: Specifies the key in plaintext form. For security purposes, the key specified in plaintext form
will be stored in encrypted form.
string: Specifies the key. This argument is case sensitive.
•
In non-FIPS mode, the encrypted form of the key is a string of 1 to 373 characters. The plaintext
form of the key is a string of 1 to 255 characters.
•
In FIPS mode, the encrypted form of the key is a string of 15 to 373 characters. The plaintext
form of the key is a string of 15 to 255 characters. The plaintext string must contain digits,
uppercase letters, lowercase letters, and special characters.
single-connection: The device and the secondary HWTACACS accounting server use the same
TCP connection to exchange all accounting packets for all users. If you do not specify this keyword,
the device establishes a new TCP connection each time it exchanges accounting packets with the
secondary accounting server for a user. As a best practice, specify this keyword to reduce TCP
connections for improving system performance if the HWTACACS server supports the
single-connection method.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance to which the secondary
HWTACACS accounting server belongs. The vpn-instance-name argument is a case-sensitive string
of 1 to 31 characters. If the server is on the public network, do not specify this option.
127