Domain Default Enable - HP FlexNetwork MSR Series Command Reference Manual

•
The name cannot contain a forward slash (/), backslash (\), vertical bar (|), quotation marks ("),
colon (:), asterisk (*), question mark (?), left angle bracket (<), right angle bracket (>), or at sign
(@).
•
The name cannot be d, de, def, defa, defau, defaul, default, i, if, if-, if-u, if-un, if-unk, if-unkn,
if-unkno, if-unknow, or if-unknown.
Usage guidelines
All ISP domains are in active state when they are created.
You can modify settings for the system-defined ISP domain system, but you cannot delete this
domain.
An ISP domain cannot be deleted when it is the default ISP domain. Before you use the undo
domain command, change the domain to a non-default ISP domain by using the undo domain
default enable command.
Use short domain names to ensure that user names containing a domain name do not exceed the
maximum name length required by different types of users.
Examples
# Create an ISP domain named test and enter ISP domain view.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test]
Related commands
display domain

domain default enable

domain if-unknown
state (ISP domain view)
domain default enable
Use domain default enable to specify the default ISP domain. Users without any domain name
included in the usernames are considered in the default domain.
Use undo domain default enable to restore the default.
Syntax
domain default enable isp-name
undo domain default enable
Default
The default ISP domain is the system-defined ISP domain system.
Views
System view
Predefined user roles
network-admin
Parameters
isp-name: Specifies the ISP domain name, a case-insensitive string of 1 to 255 characters. The ISP
domain must already exist.
42