Display Ip Source Binding - HP FlexNetwork MSR Series Command Reference Manual

IP source guard commands
Commands and descriptions for centralized devices apply to the following routers:
•
MSR1002-4/1003-8S.
•
MSR2003.
•
MSR2004-24/2004-48.
•
MSR3012/3024/3044/3064.
•
MSR954 (JH296A/JH297A/JH298A/JH299A/JH373A).
•
MSR958 (JH300A/JH301A).
Commands and descriptions for distributed devices apply to MSR4060 and MSR4080 routers.
Static IPSG is supported only on the following ports:
•
Layer 2 Ethernet ports on the following modules:
HMIM-8GSW.

HMIM-8GSWF.

HMIM-24GSW.

HMIM-24GSWP.

SIC-4GSW.

SIC-4GSWP.

•
Fixed Layer 2 Ethernet ports on the following routers:
MSR1002-4/1003-8S.

MSR2004-24/2004-48.

MSR954 (JH296A/JH297A/JH298A/JH299A/JH373A).

MSR958 (JH300A/JH301A).

Dynamic IPSG is supported only on the following ports:
•
Layer 2 Ethernet ports on the following modules:
HMIM-8GSW.

HMIM-8GSWF.

HMIM-24GSW.

HMIM-24GSWP.

•
Fixed Layer 2 Ethernet ports on MSR2004-24 and MSR2004-48 routers.

display ip source binding

Use display ip source binding to display IPv4SG bindings.
Syntax
Centralized devices in standalone mode:
display ip source binding [ static | [ vpn-instance vpn-instance-name ] [ dhcp-snooping | dot1x
| wlan-snooping ] ] [ ip-address ip-address ] [ mac-address mac-address ] [ vlan vlan-id ]
[ interface interface-type interface-number ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display ip source binding [ static | [ vpn-instance vpn-instance-name ] [ dhcp-snooping | dot1x
| wlan-snooping ] ] [ ip-address ip-address ] [ mac-address mac-address ] [ vlan vlan-id ]
[ interface interface-type interface-number ] [ slot slot-number ]
928