Server-Detect (Portal Web Server View) - HP FlexNetwork MSR Series Command Reference Manual
Comware 7 security
Hide thumbs
Also See for FlexNetwork MSR Series:
- Configuration manual (392 pages) ,
- Configuration manuals (159 pages)
Advertisement
undo server-detect
Default
Portal authentication server detection is disabled.
Views
Portal authentication server view
Predefined user roles
network-admin
Parameters
timeout timeout: Specifies the detection timeout in the range of 10 to 3600 seconds. The default is
60 seconds.
{ log | trap } *: Specifies the action to be taken after the device detects reachability status change of
the portal authentication server. You can select one of the following options or both:
•
log—When reachability status of the portal authentication server changes, the device sends a
log message. The log message contains the name, the original state, and the current state of
the portal authentication server.
•
trap—When reachability status of the portal authentication server changes, the device sends a
trap message to the NMS. The trap message contains the name and the current state of the
portal authentication server.
Usage guidelines
The portal authentication server detection feature is effective only when the portal authentication
server supports server heartbeat. Now only the IMC portal authentication server supports server
heartbeat.
The detection timeout configured on the device must be greater than the server heartbeat interval
configured on the portal authentication server.
If the device receives portal packets from the portal authentication server before the detection
timeout expires and verifies the correctness of the packets, the device considers the portal
authentication server is reachable. Otherwise, the device considers the portal authentication server
is unreachable.
Examples
# Enable server detection for the portal authentication server pts:
•
Set the detection timeout to 600 seconds.
•
Configure the device to send a log message and a trap message if the server reachability status
changes.
<Sysname> system-view
[Sysname] portal server pts
[Sysname-portal-server-pts] server-detect timeout 600 log trap
Related commands
portal server
server-detect (portal Web server view)
Use server-detect to enable portal Web server detection.
Use undo server-detect to disable portal Web server detection.
Syntax
server-detect [ interval interval ] [ retry retries ] { log | trap } *
312
Advertisement
