Reset Portal Safe-Redirect Statistics - HP FlexNetwork MSR Series Command Reference Manual

Related commands
display portal safe-redirect statistics

reset portal safe-redirect statistics

Use reset portal safe-redirect statistics to clear portal safe-redirect packet statistics.
Syntax
Centralized devices in standalone mode:
reset portal safe-redirect statistics
Distributed devices in standalone mode/centralized devices in IRF mode:
reset portal safe-redirect statistics [ slot slot-number ]
Distributed devices in IRF mode:
reset portal safe-redirect statistics [ chassis chassis-number slot slot-number ]
Views
User view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command
clears statistics for all cards. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command clears statistics for all member devices. (Centralized devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command clears
statistics for all cards. (Distributed devices in IRF mode.)
Examples
# (Centralized devices in standalone mode.) Clear portal safe-redirect packet statistics.
<Sysname> reset portal safe-redirect statistics
# (Distributed devices in standalone mode/centralized devices in IRF mode.) Clear portal
safe-redirect packet statistics on the specified slot.
<Sysname> reset portal safe-redirect statistics slot 0
Related commands
display portal safe-redirect statistics
server-detect (portal authentication server view)
Use server-detect to enable portal authentication server detection. After server detection is enabled
for a portal authentication server, the device periodically detects portal packets from the server to
identify its reachability status.
Use undo server-detect to disable portal authentication server detection.
Syntax
server-detect [ timeout timeout ] { log | trap } *
311