Reset Hwtacacs Statistics - HP FlexNetwork MSR Series Command Reference Manual
Comware 7 security
Hide thumbs
Also See for FlexNetwork MSR Series:
- Configuration manual (392 pages) ,
- Configuration manuals (159 pages)
Advertisement
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance to which the primary
HWTACACS authorization server belongs. The vpn-instance-name argument is a case-sensitive
string of 1 to 31 characters. If the server is on the public network, do not specify this option.
Usage guidelines
Make sure that the port number and shared key settings of the primary HWTACACS authorization
server are the same as those configured on the server.
Two authorization servers specified for a scheme, primary or secondary, cannot have identical IP
address, port number, and VPN instance settings.
If the specified server resides on an MPLS L3VPN, specify the VPN instance by using the
vpn-instance vpn-instance-name option. The VPN instance specified by this command takes
precedence over the VPN instance specified for the HWTACACS scheme.
You can remove an authorization server only when it is not used for user authorization. Removing an
authorization server affects only authorization processes that occur after the remove operation.
Examples
# In HWTACACS scheme hwt1, specify the primary authorization server with IP address
10.163.155.13, TCP port number 49, and plaintext shared key 123456TESTautr&!.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] primary authorization 10.163.155.13 49 key simple
123456TESTautr&!
Related commands
display hwtacacs scheme
key (HWTACACS scheme view)
secondary authorization
vpn-instance (HWTACACS scheme view)
reset hwtacacs statistics
Use reset hwtacacs statistics to clear HWTACACS statistics.
Syntax
reset hwtacacs statistics { accounting | all | authentication | authorization }
Views
User view
Predefined user roles
network-admin
Parameters
accounting: Clears the HWTACACS accounting statistics.
all: Clears all HWTACACS statistics.
authentication: Clears the HWTACACS authentication statistics.
authorization: Clears the HWTACACS authorization statistics.
Examples
# Clear all HWTACACS statistics.
<Sysname> reset hwtacacs statistics all
126
Advertisement
