Server-Type (Mac Binding Server View) - HP FlexNetwork MSR Series Command Reference Manual

undo server-detect
Default
Portal Web server detection is disabled.
Views
Portal Web server view
Predefined user roles
network-admin
Parameters
interval interval: Specifies a detection interval in the range of 1 to 1200 seconds. The default is 5
seconds.
retry retries: Specifies the maximum number of consecutive detection failures, in the range of 1 to
10. The default is 3. If the number of consecutive failed detections reaches this threshold, the device
considers the server as unreachable.
{ log | trap } *: Specifies the action to be taken after the device detects reachability status change of
the portal Web server. You can select one of the following options or both:
•
log—When reachability status of the portal Web server changes, the device sends a log
message. The log message contains the name, the original state, and the current state of the
portal Web server.
•
trap—When reachability status of the portal Web server changes, the device sends a trap
message to the NMS. The trap message contains the name and the current state of the portal
Web server.
Usage guidelines
The access device performs server detection independently. No configuration on the portal Web
server is required for the detection.
Examples
# Enable server detection for portal Web server wbs:
•
Set the detection interval to 600 seconds.
•
Set the maximum number of consecutive detection failures to 2.
•
Configure the device to send a log message and a trap massage after server reachability status
changes.
<Sysname> system-view
[Sysname] portal web-server wbs
[Sysname-portal-websvr-wbs] server-detect interval 600 retry 2 log trap
Related commands
portal web-server

server-type (MAC binding server view)

Use server-type to specify the type of a MAC binding server.
Use undo server-type to restore the default.
Syntax
server-type imc
undo server-type
313