User-Group - HP FlexNetwork MSR Series Command Reference Manual

Views
Local user view
Predefined user roles
network-admin
Parameters
active: Places the local user in active state to allow the local user to request network services.
block: Places the local user in blocked state to prevent the local user from requesting network
services.
Usage guidelines
This command applies only to the local user.
Examples
# Place device management user user1 in blocked state.
<Sysname> system-view
[Sysname] local-user user1 class manage
[Sysname-luser-manage-user1] state block
Related commands
display local-user

user-group

Use user-group to create a user group and enter its view, or enter the view of an existing user group.
Use undo user-group to delete a user group.
Syntax
user-group group-name
undo user-group group-name
Default
A system-defined user group exists. The group name is system.
Views
System view
Predefined user roles
network-admin
Parameters
group-name: Specifies the user group name, a case-insensitive string of 1 to 32 characters.
Usage guidelines
A user group consists of a group of local users and has a set of local user attributes. You can
configure local user attributes for a user group to implement centralized management of user
attributes for the local users in the group.
A user group that has local users cannot be deleted.
You can modify settings for the system-defined user group system, but you cannot delete the user
group.
79