HP FlexNetwork MSR Series Command Reference Manual page 268

Distributed devices in standalone mode/centralized devices in IRF mode:
display web-redirect rule interface { ap ap-name [ radio radio-id ] | interface-type
interface-number [ slot slot-number ] }
Distributed devices in IRF mode:
display web-redirect rule interface { ap ap-name [ radio radio-id ] | interface-type
interface-number [ chassis chassis-number slot slot-number ] }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ap ap-name: Specifies an AP by its name, a case-insensitive string of 1 to 64 characters. Valid
characters are letters, digits, underscores (_), left brackets ([), right brackets (]), slashes (/), and
minus signs (-).
radio radio-id: Specifies a radio by its ID. The value range for the radio ID varies by device model. If
you do not specify a radio, this command displays portal packet filtering rules for all radios of the AP.
The following matrix shows the ap ap-name [ radio radio-id ] option and hardware compatibility:
Hardware
MSR954 (JH296A/JH297A/JH298A/JH299A/JH373A)
MSR958 (JH300A/JH301A)
MSR1002-4/1003-8S
MSR2003
MSR2004-24/2004-48
MSR3012/3024/3044/3064
MSR4060/4080
interface interface-type interface-number: Specifies an interface by its type and number.
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command
displays Web redirect rules for the active MPU. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays Web redirect rules for the master device. (Centralized devices in IRF
mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command displays
Web redirect rules for the global active MPU. (Distributed devices in IRF mode.)
Examples
# Display all Web redirect rules on GigabitEthernet 1/0/1. (Wired application.)
<Sysname> display web-redirect rule interface gigabitethernet 1/0/1
IPv4 web-redirect rules on GigabitEthernet1/0/1:
Rule 1:
Type : Dynamic
250
Option compatibility
Yes
No
No
Yes
Yes
Yes
No