Display Port-Mapping User-Defined - HP FlexNetwork MSR Series Command Reference Manual

network-operator
Examples
# Display information about all predefined port mappings.
<Sysname> display port-mapping pre-defined
Application
tacacs-ds
net-bios-dgm
ftp
tftp
Table 99 Command output
Field
Application
Protocol
Port
Related commands
display port-mapping
port-mapping

display port-mapping user-defined

Use display port-mapping user-defined to display information about the user-defined port
mappings.
Syntax
display port-mapping user-defined [ application application-name | port port-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
application application-name: Specifies an application protocol by its name, a case-insensitive
string of 1 to 63 characters. The names invalid and other are not allowed.
port port-number: Specifies a port by its number, in the range of 0 to 65535.
Usage guidelines
If you do not specify an application protocol or a port number, this command displays all user-defined
port mappings on the device.
Examples
# Display all user-defined port mappings on the device.
Protocol Port
TCP 65
UDP 65
TCP 137, 138, 139
UDP 137, 138, 139
TCP 21
UDP 69
Description
Application protocol using the port mapping.
Transport layer protocol.
Port number of the application protocol.
694